Toro 72921 Zero Turn

5000 Series Rear Discharge 60″ 25 HP EFI 747cc

Call 405-751-3222 for our guaranteed low price.

Additional Discounts May Apply

This price doesn't include Fleet, Estate, Military, First Responder and Cash Discounts that may apply to this item. Call us at 405-751-3222 or email us at [email protected] for more information.

Toro 72921 Zero Turn

5000 Series Rear Discharge 60″ 25 HP EFI 747cc

Call 405-751-3222 for our guaranteed low price.

  • Tweel Turf Tires – No air pressure to maintain, no flat tires, no compromises. Extra long wear life two to three times that of a pneumatic tire at equal tread depth.
  • Pro Features – 60″ TURBO FORCE deck
  • Efficiency – The rear discharge design allows operators to trim on either side of the deck — no need to change direction to avoid discharging debris on roadways, sidewalks or flowerbeds.
  • EFI Fuel – Kohler’s closed-loop EFI design improves fuel efficiency by up to 25 percent.

Discounts?

This unit may qualify for additional rebates or discounts. Please call 405-251-3222 or email [email protected] to receive your guaranteed low price.

Please let us know if you are military, first-responder, commercial landscaper, church, school, estate, non-profit, or homeowner.

O'Connor's Tested Quality Approval

YOU WON’T USE IT ‘TIL WE TEST IT!

Every brand is hand-selected— because we stand behind everything we sell.

Features

Michelin® X® Tweel® Turf Tires
No air pressure to maintain, no flat tires, no compromises. Get extra long wear life two to three times that of a pneumatic tire at equal tread depth.
7-Gauge, High-Strength Steel
The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
A Flat Crisp Cut with Precision Blades
(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
Deluxe Suspension Seat
Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.
Smarter design in a bull-nose bumper.
7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4″ (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf “plowing” during spring and fall clean-up also is significantly reduced.
Smooth, Powerful Response
The new unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You’ll get a smoother, faster response while enjoying an even more reliable machine.
Operator Information Center
The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.
Folding Rollover Protection System ROPS
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
Cast Aluminum Spindle
Cools quickly for enhanced durability and performance.

Specifications

Features

Michelin® X® Tweel® Turf Tires
No air pressure to maintain, no flat tires, no compromises. Get extra long wear life two to three times that of a pneumatic tire at equal tread depth.
7-Gauge, High-Strength Steel
The TURBO FORCE deck is constructed of 7-gauge, high-strength steel which is 33% thicker and 32% higher in yield strength than ordinary 10-gauge commercial steel used in 7/10 decks. The combined effect is 75% stronger, so it easily handles the most demanding conditions and resists damage from impacts and abrasion.
A Flat Crisp Cut with Precision Blades
(.250) thick precision blades resist flexing to provide a flat, crisp cut. High-strength, heat-treated alloy steel survives impacts and provides resistance to the rapid wear commonly associated with abrasive conditions. Options include Recycler® and Atomic® mulching blades, medium sail Bahai blades, and low sail sand blades.
Deluxe Suspension Seat
Deluxe suspension seat features thick cushions, large bolsters and 3-D isolator mounts that absorb bumps and vibrations to reduce operator fatigue.
Smarter design in a bull-nose bumper.
7-gauge bull-nose bumper not only protects against frontal impacts, but also contains an integral underskirt to minimize blowout of debris and dust. The bottom, leading edge of the deck is raised 1/4″ (6 mm), allowing grass to stand more upright when entering the cutting chamber, ensuring a level cut. Leaf “plowing” during spring and fall clean-up also is significantly reduced.
Smooth, Powerful Response
The new unitized pump and wheel motor use proven commercial hydraulic components while eliminating hoses and other potential leak points. You’ll get a smoother, faster response while enjoying an even more reliable machine.
Operator Information Center
The instrument panel includes a digital hour meter, fuel gauge, and voltage meter, as well as diagnostic indicators for the safety interlock system.
Folding Rollover Protection System ROPS
A Rollover Protection System (ROPS), complete with seat belt, comes standard for operator protection in the case of accidental rollovers and tipovers. In situations where sufficient vertical clearance is not available, such as loading on an enclosed trailer, the ROPS can be temporarily unlocked and folded down.
Cast Aluminum Spindle
Cools quickly for enhanced durability and performance.
  • Engine
    25 HP* (20 kw) Kohler® Command Pro EFI 747cc
  • Fuel Capacity
    Gas/12 gal (45.4 L)
  • Cutting Width
    60″ (152.4 cm)
  • Adjustable Discharge Baffle
    Standard
  • Air Filter
    Heavy-Duty Canister Air Cleaner
  • Armrests
    Standard
  • Blade Tip Speed
    18,500+ ft/min (5638.8 m/min)
  • Blade Type
    .204” (.5 cm) heat-treated steel
  • Carrier Frame
    3″ x 1.5″ x 10 gauge (7.6 cm x 3.8 cm x 10 gauge)
  • Caster Tires
    13″ X 6.5″ – 6″ (33 cm x 16.5 cm – 15.2 cm) Flat-Free Semi-Pneumatic
  • Clutch
    Electromagnetic
  • Cup Holder
    Standard
  • Deck Design
    80-Grade 7-gauge 60″ (152.4 cm) TURBO FORCE® Rear Discharge w/ bull-nose bumper
  • Discharge Chute
    Rubber
  • Drive System
    Unitized Pumps 12cc/rev (shock valves) & Wheel Motors (14.6 cir)
  • Drive Tires
    Airless radial 24″ (60.96 cm) Michelin X Tweel Turf Tires
  • Ground Speed
    10 mph forward (16.1 kph)
  • Height of Cut
    1 in – 5.5 in (2.5 cm x 14 cm) by .25 in (.6 cm) increments
  • Number of Blades
    3
  • Hour Meter
    Standard
  • Hydraulic Fluid
    Premium synthetic
  • Ignition
    Electric
  • ROPS
    Folding; standard
  • Seat
    Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent
  • Spindle Bearings
    Greaseless ball bearings
  • Spindle Housing
    9″ (22.9 cm) diameter cast aluminum
  • Steering Controls
    1-5/8″ (4.1 cm) diameter grips; adjustable, dampened
  • Weight
    1,271 lbs. (576.5 kg)
  • Disclaimer
    *The gross horsepower of these engines was laboratory rated by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.
  • Engine
    25 HP* (20 kw) Kohler® Command Pro EFI 747cc
  • Fuel Capacity
    Gas/12 gal (45.4 L)
  • Cutting Width
    60″ (152.4 cm)
  • Adjustable Discharge Baffle
    Standard
  • Air Filter
    Heavy-Duty Canister Air Cleaner
  • Armrests
    Standard
  • Blade Tip Speed
    18,500+ ft/min (5638.8 m/min)
  • Blade Type
    .204” (.5 cm) heat-treated steel
  • Carrier Frame
    3″ x 1.5″ x 10 gauge (7.6 cm x 3.8 cm x 10 gauge)
  • Caster Tires
    13″ X 6.5″ – 6″ (33 cm x 16.5 cm – 15.2 cm) Flat-Free Semi-Pneumatic
  • Clutch
    Electromagnetic
  • Cup Holder
    Standard
  • Deck Design
    80-Grade 7-gauge 60″ (152.4 cm) TURBO FORCE® Rear Discharge w/ bull-nose bumper
  • Discharge Chute
    Rubber
  • Drive System
    Unitized Pumps 12cc/rev (shock valves) & Wheel Motors (14.6 cir)
  • Drive Tires
    Airless radial 24″ (60.96 cm) Michelin X Tweel Turf Tires
  • Ground Speed
    10 mph forward (16.1 kph)
  • Height of Cut
    1 in – 5.5 in (2.5 cm x 14 cm) by .25 in (.6 cm) increments
  • Number of Blades
    3
  • Hour Meter
    Standard
  • Hydraulic Fluid
    Premium synthetic
  • Ignition
    Electric
  • ROPS
    Folding; standard
  • Seat
    Handcrafted deluxe suspension seat with arm rests featuring bullhorn accent
  • Spindle Bearings
    Greaseless ball bearings
  • Spindle Housing
    9″ (22.9 cm) diameter cast aluminum
  • Steering Controls
    1-5/8″ (4.1 cm) diameter grips; adjustable, dampened
  • Weight
    1,271 lbs. (576.5 kg)
  • Disclaimer
    *The gross horsepower of these engines was laboratory rated by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower.

Attachments

Bagger Kit
Mulch Kit
Suspension Seat
Suspension Seat
116-1154
Hitch Kit
109-9487

READY TO FINANCE YOUR NEW MOWER?

en_USEnglish

National inventory Shortage

Due to National Inventory Shortage, our inventory fluctuates by the hour. At this time, we may or may not have this item in stock.
PLEASE CALL 405-751-3222 FOR REAL-TIME INFORMATION OF PRODUCT AVAILABILITY.
Please note: we do not deliver or ship outside the state of Oklahoma.