READY TO FINANCE YOUR NEW MOWER? LET’S GET STARTED.

CHECK OUT OUR NEWEST SELECTION: STIHL ZERO TURN MOWERS

405-751-3222

Stihl TS 420 Cut Off Saw

A 14” cutting wheel puts this cut-off machine in the big leagues of performance, efficiency and ease of use.

$1,299.99

Buy Now
Add to Cart

Stihl TS 420 Cut Off Saw

A 14” cutting wheel puts this cut-off machine in the big leagues of performance, efficiency and ease of use.

$1,299.99

The TS 420 cut off saw is the gold standard in construction power equipment. With an easy maintenance engine, advanced air filter, and 14” cutting wheel, you can cut up to 4.9” in depth.

Add to Cart
Buy Now
O'Connor's Tested Quality Approval

YOU WON’T USE IT ‘TIL WE TEST IT!

Every brand is hand-selected— because we stand behind everything we sell.

Features

Caring for Nature
The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
IntelliCarb™ Compensating Carburetor
The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box
X2 Air Filtration System
The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency
Bayonet-Style Fuel Cap
Includes retainer for easy use, even with gloves on
Semi-Automatic Belt Tensioning
With consistent semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings.
Anti-Vibration System
STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
STIHL ElastoStart™
The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
Ergonomic Grip
The ergonomic top-handle bar design provides an optimal comfortable grip in any working position.
Water Connection
Water connection with shut-off valve and quick connector.

Specifications

Features

Caring for Nature
The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
IntelliCarb™ Compensating Carburetor
The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box
X2 Air Filtration System
The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency
Bayonet-Style Fuel Cap
Includes retainer for easy use, even with gloves on
Semi-Automatic Belt Tensioning
With consistent semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings.
Anti-Vibration System
STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
STIHL ElastoStart™
The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
Ergonomic Grip
The ergonomic top-handle bar design provides an optimal comfortable grip in any working position.
Water Connection
Water connection with shut-off valve and quick connector.
  • DISPLACEMENT
    66.7 cc (4.07 cu. in.)
  • ENGINE POWER
    3.2 kW (4.4 bhp)
  • WEIGHT*
    9.6 kg (21.2 lbs.)
  • FUEL TANK CAPACITY
    710 cc (24 oz.)
  • ENGINE SPEED
    9,000 rpm (Elec. Gov.)
  • MAXIMUM SPINDLE SPEED
    5,350 rpm
  • ARBOR SIZE
    20 mm
  • MAXIMUM WHEEL SIZE
    350 mm (14″)
  • MAXIMUM CUTTING DEPTH
    125 mm (4.9″)
  • POWER SOURCE
    Gas
  • DISPLACEMENT
    66.7 cc (4.07 cu. in.)
  • ENGINE POWER
    3.2 kW (4.4 bhp)
  • WEIGHT*
    9.6 kg (21.2 lbs.)
  • FUEL TANK CAPACITY
    710 cc (24 oz.)
  • ENGINE SPEED
    9,000 rpm (Elec. Gov.)
  • MAXIMUM SPINDLE SPEED
    5,350 rpm
  • ARBOR SIZE
    20 mm
  • MAXIMUM WHEEL SIZE
    350 mm (14″)
  • MAXIMUM CUTTING DEPTH
    125 mm (4.9″)
  • POWER SOURCE
    Gas

Call for Info
405-751-3222

Add to Cart

PICKUP &
DELIVERY

QUICK & EASY FINANCING

CURBSIDE
PICKUP

WANT THE FAST TRACK TO DEALS & MORE?

2244 NW 140th Street, Oklahoma City, OK 73134

© 2021 O'Connor's Lawn & Garden. All rights reserved.
OPENING HOURS
  • Monday - Friday: 8:30a – 6:00p
  • Saturday: 9:00a – 5:00p
    Sunday: Closed
Email
CALL US AT
  • 405-751-3222
FAX
  • 405-751-3122
Legal
Find Us
Facebook Instagram Twitter Youtube Pinterest

Made with ❤ by Overflow​​ Media

en_USEnglish
es_MXSpanish en_USEnglish

National inventory Shortage

Due to National Inventory Shortage, our inventory fluctuates by the hour. At this time, we may or may not have this item in stock.
PLEASE CALL 405-751-3222 FOR REAL-TIME INFORMATION OF PRODUCT AVAILABILITY.
Please note: we do not deliver or ship outside the state of Oklahoma.